What Does It Mean When Whirlpool Washer Says Loc

When your Whirlpool washer displays the “LOC” code, it means the washer’s child lock feature is engaged. This feature is designed to prevent small children from opening the washer door and injuring themselves. To disable the child lock feature, press and hold the “Start/Pause” button for three seconds.

If your Whirlpool washer is displaying the error code “LOC,” it means that the washer’s child lock feature is engaged. This feature is designed to prevent small children from operating the washer. To disable the child lock feature, press and hold the “Start/Pause” button for three seconds.

The “LOC” error code should then be cleared and you should be able to use your washer as normal.

Whirlpool washer won't start

How do I fix my Whirlpool washer Loc?

If your Whirlpool washing machine is not draining properly, you may need to clean the drain pump filter. To do this, unplug the washing machine and remove the lower panel. Locate the drain pump filter and clean it out.

You may also need to clean the drain hose. To do this, disconnect the drain hose from the washing machine and clean it out. If your washing machine is still not draining properly, you may need to replace the drain pump.

Why is my Whirlpool washer stuck on lock?

If your Whirlpool washer is stuck on the lock position, there are a few things you can check to try and fix the issue. First, make sure that the washer is properly plugged into an electrical outlet. If it is, then check to see if the power cord is loose.

If so, tighten it. If the power cord is not loose, then unplug the washer and check the wiring inside the washer. If there are any loose wires, tighten them.

If the wiring is not loose, then the issue may be with the door lock itself. To check this, unplug the washer and remove the door. Inspect the door lock for any damage or debris.

If the door lock looks damaged, then it will need to be replaced. However, if there is no damage and the door lock is clean, then the issue may be with the door lock switch. To check the door lock switch, unplug the washer and remove the door.

Locate the door lock switch and test it with a multimeter. If the door lock switch is defective, then it will need to be replaced. However, if the door lock switch is not defective, then the issue may be with the main control board.

To check the main control board, unplug the washer and remove the back panel. Locate the main control board and test it with a multimeter.

Where is the control LOC key on a Whirlpool washer?

The control lock key on a Whirlpool washer is located on the control panel, to the left of the power button. Press and hold the control lock key for 3 seconds to lock the control panel. To unlock the control panel, press and hold the control lock key for 3 seconds.

What does LOC error mean?

If you receive a LOC error when trying to install a game or app on your Xbox One, it means that there is a problem with the location where the game or app is stored. The error message will also tell you which storage device is causing the problem. There are a few things you can do to try and fix a LOC error:

First, try restarting your Xbox One and then trying to install the game or app again. If that doesn’t work, try uninstalling the game or app and then reinstalling it. If you’re still getting the error, it’s possible that the storage device itself is the problem.

In this case, you’ll need to format the storage device and then try installing the game or app again. If you’re still having trouble, it’s possible that there’s a problem with the game or app itself. In this case, you’ll need to contact the game or app developer for help.

what does it mean when whirlpool washer says loc

Credit: applianceanalysts.com

Red lock symbol on whirlpool washing machine

If you see a red lock symbol on your Whirlpool washing machine, it means that the washer is in Child Lock mode. This feature is designed to prevent small children from being able to start the washer. To turn off Child Lock, press and hold the start/pause button for three seconds.

Whirlpool loc error dryer

If your Whirlpool dryer is displaying the error code “LOC,” there are a few things you can do to troubleshoot the problem. First, check to make sure that the dryer is properly plugged into an outlet. If the dryer is plugged in, but still not working, you may need to reset the circuit breaker.

To do this, simply flip the switch to the “off” position and then back to the “on” position. If the error code persists, you may need to replace the control panel.

Whirlpool washer locked and won’t turn on

If your Whirlpool washer won’t turn on, there are a few things you can check to try and troubleshoot the issue. First, make sure that the washer is plugged in and that the outlet it is plugged into is working. Next, check the door to make sure it is closed properly and that there is no water inside the washer.

If the door is open or there is water inside the washer, this could be the reason it won’t turn on. If neither of these is the issue, then it is possible that the washer’s lid switch is defective and needs to be replaced.

Conclusion

The “LOC” error code on a Whirlpool washing machine means that the washer’s lid is open. The washer will not operate with the lid open.

By Jacob G. Turner

Jacob G. Turner is the content director of We Home Deco. He mainly focuses on mattress reviews and comfy products. He takes a straightforward, honest approach to his reviews and endeavors to give viewers an objective look at each new product he tries out.

Leave a comment

Your email address will not be published. Required fields are marked *