Since carpeting is expensive, you want to keep it maintained over the long haul. Even while keeping a carpet clean involves ongoing work, with persistence and dedication, you may benefit from a clean carpet for many years to come. Consistent cleaning is the secret.
Regular vacuuming and periodic professional carpet cleaning is necessary for a spotless carpet. Address the stains immediately as soon as you spot them. Maintaining your carpet clean and free of dust, grime, stains, and other debris will keep it looking newer for its extended lifespan.
By refraining from actions like rubbing stains and utilizing carpet powders, you can work to avoid carpet damage. Due to their extended lifespan and high maintenance requirements, carpets provide the foundation for a clean home.
Here in this blog, we will discuss some easy steps that will protect your carpet from getting dirty. These tips are suggested by experts at Xtra touch carpet care, the top carpet cleaning in the Vancouver area.
7 Simple Ways To Protect Your Carpet From Getting Dirty
1. Use Doormats At Every Entrance
As a method to safeguard your flooring and carpeting, ensure that all of your home’s entrances have a doormat so that you and visitors may wipe their shoes off when they enter.
Having two at each entry would even be a good idea, especially in the winter when snow, salt, and slush can create a mess. One would be outside to wipe your shoes on, and the other would be inside to remove them without bringing the debris inside.
Entrance mats can assist in keeping your tile, carpet, or wooden flooring clean and immaculate for longer by protecting it from unsightly and harmful pollutants.
2. Clean The Stains Right Away
It will be more challenging to clean up the spills and food or pet stains later, and your carpet will sustain more damage the longer you wait to deal with them. Be careful about cleaning up spills as soon as they happen to ensure that your carpeting and rugs last as long as possible and remain spotless for a long time.
Additionally, keep in mind that various materials and stain types call for different clean-up techniques, so be sure you’re using the appropriate cleaning method for your carpet.
3. Vacuum Twice A Week
Make sure you vacuum your carpet frequently while we’re talking about it. First and foremost, your carpet needs to be vacuumed at least twice a week, but how you vacuum also counts.
Depending on how much foot activity the carpet receives, you should run over each section on your carpet 8–12 times. Vacuum in all directions to remove as much dirt and debris as possible.
You can consider purchasing a robot vacuum to pick up the slack in between your hands-on sessions if you can’t vacuum twice a week.
4. Always Rub, Never Blot
It comes naturally to rub dirt off. You do it when you shine shoes, wash dishes, and even if a stain on sheets persists, rubbing causes carpets to spread. Additionally, there’s a high risk that you’ll work the stain deeper into the fabric, which is the surest path to long-lasting degradation.
Please be aware that no matter what cleaning product you use, only blotting will remove the stain. Since you’re putting pressure on the area, It causes the liquid to be absorbed into the cloth or sponge.
Paying attention to the direction you blot is another approach to protecting carpet fibers. Blotting from the edge of the stain inwards prevents the stain from spreading.
5. Baking Soda Removes Oil Stains
One of the challenging materials to remove from carpets is oil. While cleaning carpets, you sometimes can’t just saturate the stains in hot water and dab them away. When it comes to removing oils from carpets, baking soda is the best remedy.
Simply sprinkle baking soda evenly on the affected area, and let it lie for a few hours. Vacuum the crust that forms as the baking soda absorbs the stain, leaving behind a much lighter stain.
After the majority of the oil has been absorbed, you can move on to dab the discoloration.
6. Fluff Your Carpet With Vinegar
When it comes to caring for carpets, vinegar can be used in a variety of ways, similar to baking soda. One of the most intriguing uses is to fluff up high-traffic areas where the carpet looks worn out and the fibers have been flattened.
Dilute the vinegar with water in an equivalent ratio, then spray on the affected area. Take an ordinary spoon and run it sideways down the carpeting to release the fibers and bring back the carpeting’s original texture after it has absorbed the mixture.
7. Get Professionally Cleaned Annually
Regular vacuuming and DIY cleaning is necessary, but it only helps you get rid of surface debris from your carpet. Deep cleaning at the expert level removes all the unsightly debris, including dust mites, pet dander, pollen, and allergies.
They have the expertise and required cleaning equipment that makes the cleaning process fast and effective. Moreover, the cleaning solution they use removes the accumulated dirt and grime more thoroughly, which gives long-lasting results.
The bottom line is carpet is an investment, and anybody will certainly want to maintain it for a long time. Some simple methods discussed in this blog will help prevent your carpet from getting dirty and extend its lifespan.
Apart from DIY cleaning, investing in professional carpet cleaning near you will save you money in the long run. As professional carpet cleaning is way more effective than DIY cleaning methods.